Dividend stocks outperform non-dividend-paying stocks over the long run. It happens in good markets and bad, and the benefit of dividends can be quite striking -- dividend payments have made up about 40% of the market's average annual return from 1936 to the present day. But few of us can invest in every single dividend-paying stock on the market, and even if we could, we might find better gains by being selective. That's why we'll be pitting two of the Dow Jones Industrial Average's (DJINDICES: ^DJI ) dividend payers against each other today to find out which Dow stock is the true dividend champion. Let's take a closer look at our two contenders now.
Tale of the tape
Merck (NYSE: MRK ) was the Dow's first pure-play pharmaceutical company when it joined the index 33 years ago. The New Jersey-based drugmaker might just have the most ancient roots of any Dow component, as it traces its origins to 1668, when namesake Friedrich Merck acquired a drugstore in Germany. However, it wasn't until after a 1953 merger with American drugmaker Sharp & Dohme that Merck began to resemble the modern multinational pharmaceutical manufacturer today's investors know and love. Since that merger, Merck has grown to become the third-largest pharmaceutical company in the United States by revenues.
Top Blue Chip Stocks For 2015: Twin Butte Energy Ltd (TBTEF.PK)
Twin Butte Energy Ltd. (Twin Butte) is a Canada-based junior oil and gas exploration and production company. The Company is engaged in the acquisition of, exploration for and the development and production of petroleum and natural gas properties in Western Canada. During the year ended December 31, 2011, it drilled a total of 125 (80.9 net) wells. Its Frog Lake property is located approximately 75 kilometers northwest of Lloydminster with lands. Its Freemont area is located 60 kilometers southeast of Lloydminster. During 2011, Twin Butte drilled 11 gross wells in Plains region. Production from its west central Alberta region was approximately 1,545 barrels of oil equivalent per day during 2011. Production from its Deep Basin region was approximately 593 barrels of oil equivalent per day during 2011. Effective September 30, 2013, the Company disposed a non-core, west central Alberta, gas asset. In November 2013, the Company acquired Black Shire Energy Inc. Advisors' Opinion:- [By MLP Trader]
Here are the current top five companies in the list:
CompanySymbolEV/BOEPD/NetbackPrice/NAVEV/DACFPinecrest(PNCGF.PK)53564%4.0XLightstream(LSTMF.PK)131753%4.5XNovus(NOVUF.PK)133290%4.1XZargon(ZARFF.PK)138664%5.6XTwin Butte(TBTEF.PK)155885%5.5XOf the larger companies, one that remains obstinately near the top of the list is Lightstream . Lightstream trades at 40% of its book value and a whopping 13.4% yield.
Hot Healthcare Technology Companies To Buy For 2014: KMG Chemicals Inc (KMG)
KMG Chemicals, Inc., incorporated on July 30, 1992, manufactures, formulates and globally distributes specialty chemicals. The Company has acquired and operates businesses selling electronic chemicals and industrial wood treating chemicals. The Company operates in two segments: electronic chemicals and wood treating chemicals. The Company's electronic chemicals segment provides wet process chemicals to the semiconductor industry, primarily to clean and etch silicon wafers in the production of semiconductors. The Company supplies wet process chemicals to the semiconductor industry in the United States and Europe. Its wood treating chemicals, pentachlorophenol (penta), and creosote, are sold to industrial customers who use these preservatives primarily to extend the useful life of utility poles and railroad crossties. The Company is the supplier of penta in North America, and supplier of creosote in the United States to wood treaters who do not produce their own creosote. On March 1, 2012, the Company discontinued its animal health business. In June 2013, the Company announced that it completed the acquisition of the Ultra Pure Chemicals subsidiaries of OM Group Inc located in the United States, England and Singapore.
Electronic Chemicals
The Company's electronic chemicals business sells wet process chemicals primarily to the semiconductor industry. These chemicals are used to clean and etch silicon wafers in the production of semiconductors. The Company's products include sulfuric, phosphoric, nitric and hydrofluoric acids, ammonium hydroxide, hydrogen peroxide, isopropyl alcohol and various blends of chemicals. The Company's products are sold in bulk and in containers, including bottles, drums and totes. This process is accomplished at the Company's Pueblo, Colorado, Hollister, California and Milan, Italy facilities, although the Company contracts with General Chemical to produce certain products for the Company at its facility. As of July 31, 2012, the Company's electronic ! chemicals business accounted for 58.5% of its net sales.
Wood Treating Chemicals
The Company supplies penta and creosote to industrial customers who use these products to extend the useful life of wood, primarily utility poles and railroad crossties. The Company's penta products include penta blocks, solutions and hydrochloric acid, a byproduct of penta production. Penta is used primarily to treat utility poles, protecting them from insect damage and decay. The Company manufactures solid penta blocks at its facility in Matamoros, Mexico. The Company sells solid penta to its customers, or make it into a liquid solution of penta concentrate at its Matamoros, Mexico and Tuscaloosa, Alabama facilities. The Company sells penta products primarily in the southeastern and northwestern United States and in Canada. The hydrochloric acid the Company produces as a byproduct of penta production is sold in Mexico for use in the steel and oils well service industries. Creosote is a wood preservative used to treat utility poles and railroad crossties. Creosote is produced by the distillation of coal tar, a by-product of the transformation of coal into coke. The Company sells creosote to wood treaters throughout the United States. As of July 31, 2012, the Company's wood treating chemicals constituted about 41.4% of the Company's net sales.
The Company competes with Honeywell, Kanto Corporation, Avantor, BASF and the OM Group.
Advisors' Opinion:- [By Rich Smith]
KMG Chemicals (NYSE: KMG ) is buying OM Group's (NYSE: OMG ) Ultra Pure Chemicals subsidiaries in the U.S., U.K., Singapore, and perhaps in France as well.
Hot Healthcare Technology Companies To Buy For 2014: Pentair Inc.(PNR)
Pentair, Inc. operates as a diversified industrial manufacturing company worldwide. The company?s Water segment offers products and systems for use in the movement, storage, treatment, and enjoyment of water. It offers light duty diaphragm pumps and solid handling pumps for water and wastewater applications and agricultural spraying; and pressure tanks for residential applications. This segment also provides control valves, pressure tanks, membranes, carbon products, point of entry and point of use systems, and other filter cartridges for commercial and residential water filtration applications; and pool equipment and accessories, such as pumps, filters, heaters and heat pumps, lights, automatic controls, automatic pool cleaners, commercial deck equipment, maintenance equipment, and pool accessories for commercial and residential pool maintenance, repair and renovation, and service and construction. In addition, it offers filter systems, filter cartridges, pressure vessels , and dispensing pumps for commercial, foodservice, industrial, marine and aviation markets. This segment distributes its products through wholesale distributors, retail distributors, original equipment manufacturers (OEM), home centers, and home and pool builders. The company?s Technical Products segment provides standard, modified, and custom enclosures that house and protect sensitive electronics and electrical components, as well as protect people that use them. Its products comprise metallic and composite enclosures, cabinets, cases, subracks, backplanes, and associated thermal management systems used in industrial machinery, data communications, networking, telecommunications, test and measurement, automotive, medical, security, defense, and general electronics. This segment distributes its products through electrical and data contractors, electrical and electronic components distributors, and OEMs. Pentair, Inc. was founded in 1966 and is based in Golden Valley, Minne sota.
Advisors' Opinion:- [By James E. Brumley]
What do BG Medicine, Inc. (NASDAQ:BGMD) and Pentair, Ltd. (NYSE:PNR) have in common? Most investors would say absolutely nothing. BGMD is a small cap medical diagnostics company, while PNR is a large cap industrial equipment manufacturer. Those are worlds that simply never collide. The directions each stock has been traveling in over the past few months have even been polar opposites.
- [By The Part-time Investor]
The following stocks met the criteria in January of 2008 and were put into the initial portfolio:
Abbot Labs (ABT)Advanced data processing (ADP)Associated Banc-Corp (ASBC)Bank of America (BAC)BB&T Corp. (BBT)Bemis Company (BMS)Anheuser Busch (BUD)The Chubb Corporation (CB)Clorox (CLX)Comerica Inc. (CMA)Diebold Inc. (DBD)Emerson Electronics (EMR)First Dollar Corp. (FDO)First Third BanCorp. (FITB)Gannett Co, Inc. (GCI)General Electric (GE)Hershey (HSY)Illinois Tools Works (ITW)Johnson and Johnson (JNJ)Leggett and Platt (LEG)Eli Lilly (LLY)La-Z-Boy (LZB)McDonald's (MCD)Marsh and Ilsley (MI)M&T Bancorp (MTB)PepsiCo (PEP)Pfizer (PFE)Procter & Gamble (PG)Pentair Ltd. (PNR)Regions Financial Corp. (RF)Rohm and Haas (ROH)RPM International (RPM)Sherwin Williams (SHW)Sysco Corp. (SYY)UDR Inc. (UDR)Historical quotes were taken from Yahoo Finance. $10,000 was put into each position, to the nearest whole share, so a total of $349,262.89 was invested. From 1/15/08 through 5/16/13 all dividends were reinvested back into the stock that paid them. If a dividend cut was announced, that stock was sold on the ex-div date of the new, lower dividend.
Hot Healthcare Technology Companies To Buy For 2014: Camtek Ltd (CAMT)
Camtek Ltd. (Camtek), incorporated in 1987, designs, develops, manufactures and markets automated solutions dedicated for enhancing production processes and yield for the semiconductor manufacturing and packaging and the printed circuit board (PCB) and integrated circuit (IC) substrate industries. Camtek also designs, develops, manufactures and markets automated optical inspection (AOI), systems and related products. The Company�� AOI systems are used to enhance both production processes and yields for manufacturers in the semiconductor manufacturing and packaging industry and PCB and IC Substrate industry. Through the acquisition of Printar's assets, it also engaged in developing, manufacturing, sale and marketing of direct digital material deposition systems and inks for the PCB industry, with two major fields of activity: Solder Mask and Legend. In addition, through the acquisition of Sela, it is also engaged in the development, manufacturing and marketing of automated scanning electron microscope (SEM) and transmission electron microscope (TEM) sample preparation equipment, primarily for the semiconductor industry.
As of December 31, 2011, the Company had sold more than 2,500 AOI systems in 34 countries worldwide. The Company's PCB customer base includes the majority of the 100 PCB manufacturers worldwide. As of December 31, 2011, it had sold over 300 Falcon systems to more than 25 semiconductor manufacturers, among them outsourced semiconductor assembly and test (OSAT), integrated device manufacturers (IDM) and wafer level packaging subcontractors, including eight out of the top 10 semiconductors companies.
Camtek�� AOI systems consist of an electro-optical assembly unit, either movable or fixed, which consists of a video camera, precision optics and illumination sources. The electro-optical unit captures the image of the inspected product; a precise, either movable or fixed table, that holds the inspected product, and an electronic hardware unit, which operates the! entire system and includes embedded components that process and analyze the captured image by using its algorithms. Its systems can also compile and communicate statistical reports of inspection findings through the customer�� factory information system. The Company offers a range of systems for automated optical inspection of semiconductor wafers, IC substrates and PCBs. These systems are used to enhance production yields and assist in controlling manufacturing processes at wafer fabrication, test and assembly houses, and PCB plants worldwide.
The Company�� Falcon systems are designed for the back end market of the semiconductor industry. The Falcon�� advanced algorithms and inspection capabilities enable its dedicated models to detect defects in the die, which, if left undetected, may cause failure. The Condor is designed to meet the current and future inspection needs of the semiconductor industry. The Condor, through algorithms and advanced hardware configuration, is designed to enhance two dimensional (2D) and three dimensional (3D) detection abilities and increased throughput. The Condor family includes models for: 3D and 2D metrology and inspection of bumped-wafer prepared for packaging in the flip-chip technology; 2D metrology and inspection of finished wafers at the end of their manufacturing process and in test houses; Post-dicing inspection of frame-mounted wafers at assembly and packaging facilities, where it adds the value of detecting dicing-related damage, and inspection and metrology of micro-electro mechanical systems (MEMS) and other special applications.
Condor 5LED is an AOI system designed to provide solutions to a range of requirements that are to light emitting diode (LED) semiconductor manufacturers. The LED market�� special inspection requirements are characterized by 3-6 inch wafers, each of which may contain between 100 to over 200 thousand LED devices per wafer. Typically, the wafer is made of a translucent compound semiconductor, such as g! allium ar! senide, gallium phosphide and/or indium phosphide. The Gannet system is designed for the front end market of the semiconductor industry.
The Company�� AOI products for this industry consist of five product lines: the Phoenix, Dragon and Orion for the inspection of inner and outer layers of PCB panels and ultra-fine-line IC substrate; large area masks (LAM) dedicated for inspection of artwork; and the Pegasus for final inspection (AFI) of IC substrates and high density interconnect (HDI) panels. The Phoenix product family, introduced in November 2011, is designed to support a range of the demanding PCB and IC substrate applications, while keeping in pace with the dynamic technology changes in the industry. The Phoenix product family is enhanced with Spark - Camtek's and detection engine providing high detection capabilities, while minimizing false calls.
Dragon systems are high-throughput, automation-ready systems for inspection of all PCB types in a mass production environment. Dragon models are optimized for specific PCB technology ranges - from mainstream circuits of typically 100 (microns) conductor line width, up to high density substrates having 12 (microns) wide conductive lines. All Dragon models are designed to interface with automated material handling mechanisms provided by the Company or other automation suppliers. Orion systems are stand-alone AOI systems for high volume inspection of all PCB types designed to operate in inspectify mode of operation. Inspectify is a mode of operation enabling the operator to perform verification immediately after inspection on the same system, thus saving time and eliminating handling-related defects.
LAM is specially designed for main-stream LAM inspection. It offers unparalleled detection ability on LAM with down to 25 (microns) line/space width technology. The LAM incorporates advanced technology innovations to ensure the level of detection that these masks require at this critical production stage. Camtek offers! various ! stand-alone verification systems that enable verification of panels after inspection. The Pegasus line includes systems for automated inspection of finished IC substrates that are subsequently used in packaging of ball grid array (BGA) and Chip Scale Package (CSP) devices. The Pegasus inspects both sides of the substrate, detecting process and mechanical defects, in particular in the gold-plated areas, where the substrate will interconnect with the silicon die or the PCB, and in the solder-mask areas. Pegasus models handle substrates in strip format in magazines.
GreenJet is a SM digital printing system aimed to replace the conventional SM application lines for prototypes and high mix low volume production. The GreenJet system offers manufacturers flexible and digital SM printing technology solution. The LGP system incorporates PCB digital legend printing technologies with specially developed heat curable ink, resulting in output and system performance. Camtek has developed the inks for both LGP and GreenJet, which involves different chemicals mixed together in order to reach the required ink characterization.
The Company competes with Rudolph Technologies Inc., KLA-Tencor Corporation, Topcon Corporation, Toray Industries, Inc., Hitachi Ltd., Nidec Tosok Corporation., FEI Company, SII Nanotechnology Japan, Carl Zeiss, Inc., Orbotech Ltd., Dainippon Screen Manufacturing Company, Lloyd-Doyle Limited, Gigavis Co. Ltd., ATI Electronics Pty Ltd., Shirai Electronics Industrial Co. Ltd., First EIE SA and MicroCraft K.K.
Advisors' Opinion:- [By Eddie Staley]
In trading on Tuesday, technology shares were relative laggards, down on the day by about 1.68 percent. Top decliners in the sector included Camtek (NASDAQ: CAMT), down 15.54 percent, and MakeMyTrip (NASDAQ: MMYT), off 11.85 percent.
- [By Paul Ausick]
Stocks on the Move: Ingersoll-Rand is down 22.2% at $55.54 after completing a spin-off of Allegion plc. Canadian National Railway Co. (NYSE: CNI) is down 48.6% at $57.78 following a 2-for-1 stock split. Camtek Ltd. (NASDAQ: CAMT) is up 38.9% at $5.71.
- [By James E. Brumley]
In retrospect, their pullbacks come as no real surprise. Neither Voxeljet AG (NYSE:VJET) nor Camtek LTD. (NASDAQ:CAMT) saw their shares soar on any news that was meaningfully sustainable, and after the "shoot first, ask questions later" market had a chance to start asking questions, it became clear that - even with the largest of glimmers of corporate progress unveiled a few weeks ago - CAMT and VJET both had been bid up more on hype and less on substance. Meanwhile (and this could be bitterly ironic to some), a small cap play in the same 3D printing space that (1) didn't beat the daylights out of its hype-drum, and (2) is actually much closer to bringing a revenue-bearing product to the market [per today's news - more on that below] isn't getting anywhere near the same attention. That company? Makism 3D Corp. (OTCBB:MDDD). The good news is, MDDD finally looks like it's revving its engine, while Camtek and Voxeljet AG shares continue to deteriorate.
Hot Healthcare Technology Companies To Buy For 2014: Hyundai Motor Co (HYMLF.PK)
HYUNDAI MOTOR COMPANY is a Korea-based automobile manufacturer. Along with its subsidiaries, the Company operates in three business divisions: vehicle division, financial division and other business division. Its vehicle division manufactures passenger cars under the brand names of Centennial, Genesis, Veloster, Azera, Sonata, i40, Elantra, Accent, i30cw, i20, ix20 and others; sport utility vehicles (SUVs) under the brand names of Veracruz, Santa Fe and Tucson, and commercial vehicles, including trucks, buses, special vehicles and bare chassis, as well as provides automobile maintenance services and related components. Its financial division mainly provides automobile financing services and credit card services. Its other business division includes construction of railways and others. Advisors' Opinion:- [By Quoth the Raven]
It was reported this morning that Hyundai's (HYMLF.PK) CEO, John Krafcik, has gone on the record and said that the U.S. government shutdown could affect the U.S. automobile market negatively. He's made a headline that's been picked up by news organizations across the board this morning. It echoes sentiments from executives at both Ford and GM. Autonews.com reported:
Hot Healthcare Technology Companies To Buy For 2014: Western Gas Equity Partners LP (WGP)
Western Gas Equity Partners, LP, incorporated on September 11, 2007, was formed to own three types of partnership interests in Western Gas Partners, LP (WES). WES is a limited partnership formed by Anadarko Petroleum Corporation to own, operate, acquire and develop midstream energy assets. As of December 31, 2011, the Company had no independent operations. On January 13, 2012, WES acquired 100% interest of Mountain Gas Resources LLC (MGR). On August 1, 2012, WES acquired 24% interest of Chipeta Processing LLC (Chipeta).
WES is engaged in the business of gathering, processing, compressing, treating and transporting natural gas, condensate, natural gas liquids (NGLs) and crude oil for Anadarko, as well as third-party producers and customers. The assets of WGP, through its partnership interests in WES, include thirteen gathering systems, seven natural gas treating facilities, ten natural gas processing facilities, two NGL pipelines, one interstate gas pipeline, one intrastate gas pipeline, and three separate interests in Fort Union, White Cliffs Pipeline, LLC (White Cliffs) and Rendezvous Gas Services, LLC (Rendezvous). These assets are located in East and West Texas, the Rocky Mountains (Colorado, Utah and Wyoming), and the Mid-Continent (Kansas and Oklahoma). WES also has facilities under construction in South Texas and northeast Colorado. During the year ended December 31, 2011, WES completed the construction of a cryogenic processing train at its Chipeta facility , which had a designed capacity of approximately 300 million cubic feet of natural gas per day and was placed into service in October 2012.
Advisors' Opinion:- [By Jonas Elmerraji]
The exact same setup is potentially giving traders a reason to jump into shares of $8.5 billion midstream gas company Western Gas Equity Partners (WGP). Just like Flotek, WGP is forming a textbook channel up. And this week, Western Gas is testing trendline support.
It's a little too early to call WGP's trendline buyable here. At some point, all trends eventually fail -- and when this one does, you don't want to be left holding the bag. A bounce this week will be a good indication that WGP can still catch a bid at this price level. When and if that happens, I'd recommend keeping a tight protective stop in place just below WGP's most recent swing low at $38.
While the 50-day moving average has been crossing paths with WGP quite a bit in the last month, I'd recommend ignoring it. The average hasn't acted as a meaningful support or resistance level to date. In the case of this particular name, it's just not technically relevant.
No comments:
Post a Comment