Although we don't believe in timing the market or panicking over market movements, we do like to keep an eye on big changes -- just in case they're material to our investing thesis.
What: Shares of Titan Machinery (NASDAQ: TITN ) dropped as much as 18% today after releasing earnings.
So what: Fiscal fourth-quarter revenue rose 29.2% from a year ago to $784.5 million, beating estimates of $694.8 million. But earnings per share were just $0.73, $0.19 below estimates, and the company's guidance of 2014 earnings of $2.00 to $2.30 was well below the $2.59 estimate. �
Now what: Gross margin fell to 13.3% in the fourth quarter from 15.3% a year ago, which is why earnings fell short of expectations. The construction business accounted for much of that decline, and the company will work to reverse the trend in 2014. This isn't good news for the company or the stock, but at 11 times forward earnings (on the low end), the stock isn't a bad value, and if the economy picks up, so should earnings.
Interested in more info on Titan Machinery? Add it to your watchlist by clicking here.�
10 Best Promising Stocks To Buy Right Now: Danaher Corp (DHR)
Danaher Corporation (Danaher) designs, manufactures and markets professional, medical, industrial and commercial products and services. The Company�� research and development, manufacturing, sales, distribution, service and administrative facilities are located in more than 50 countries. It operates in five segments: Test & Measurement; Environmental; Life Sciences & Diagnostics; Dental; and Industrial Technologies. In April 2011, the Company sold its Pacific Scientific Aerospace (PSA) business. On June 30, 2011, the Company acquired Beckman Coulter, Inc. (Beckman Coulter). In January 2012, the Company sold its Accu-Sort businesses. In February 2012, the Company sold its Kollmorgen Electro-Optical (KEO) business. During the year ended December 31, 2011, the Company acquired EskoArtwork, On February 6, 2012, L-3 Communications Holdings, Inc. acquired Kollmorgen Electro-Optical unit of the Company. In January 2013, the Company acquired Navman Wireless.
TEST & MEASUREMENT
The Company�� Test & Measurement segment is a provider of electronic measurement instruments and monitoring, management and optimization tools for communications and enterprise networks and related services. The segment�� products are used in the design, development, manufacture, installation, deployment and operation of electronics equipment and communications networks and services. Customers for these products and services include manufacturers of electronic instruments; service, installation and maintenance professionals; manufacturers who design, develop, manufacture and install network equipment, and service providers who implement, maintain and manage communications networks and services.
The Company�� business designs, manufactures, and markets a variety of compact professional test tools, thermal imaging and calibration equipment for electrical, industrial, electronic and calibration applications. These test products measure voltage, current, resistance, power quality, frequency, p! ressure, temperature and air quality. Typical users of these products include electrical engineers, electricians, electronic technicians, medical technicians, and industrial maintenance professionals. Its business also offers general purpose test products and video test, measurement and monitoring products used in electronic design, manufacturing and advanced technology development. The business��general purpose test products, including oscilloscopes, logic analyzers, signal sources and spectrum analyzers, are used to capture, display and analyze streams of electrical data. The Company sells these products into a variety of industries with electronic content, including the communications, computer, consumer electronics, education, military/aerospace and semiconductor industries.
Typical users include research and development engineers who use its general purpose test products to design, de-bug, monitor and validate the function and performance of electronic components, subassemblies and end-products. Its video test products include waveform monitors, video signal generators, compressed digital video test products and other test and measurement equipment used to enhance a viewer�� video experience. Typical users of these products include video equipment manufacturers, content developers and traditional television broadcasters. Products in this business are marketed under the FLUKE, TEKTRONIX, KEITHLEY, RAYTEK, FLUKE BIOMEDICAL, AMPROBE and MAXTEK brands.
The communications businesses offer network management solutions, handheld and fixed diagnostic equipment and security solutions, as well as related installation and maintenance services, for a range of private network applications, as well fixed and mobile communications systems. Typical users of the business��products include network engineers, installers, operators, and technicians. Its network management tools help network operators continuously manage network performance and optimize the utilization, uptime and servi! ce qualit! y of the network. Products in this business are marketed under the TEKTRONIX, FLUKE NETWORKS, ARBOR, VISUAL NETWORKS and AIRMAGNET brands.
Matco Tools manufactures and distributes professional tools, toolboxes and automotive equipment through independent mobile distributors, who sell primarily to professional mechanics under the MATCO brand. Hennessy Industries is a North American full-line wheel service equipment manufacturer, providing brake lathes, vehicle lifts, tire changers, wheel balancers, and wheel weights under the AMMCO, BADA and COATS brands. Typical users of these products are automotive tire and repair shops. Sales are generally made through its direct sales personnel, independent distributors, retailers, and original equipment manufacturers.
ENVIRONMENTAL
The Company�� Environmental segment provides products that help protect its water supply and air quality and serves two primary markets: water quality and retail/commercial petroleum. Danaher�� water quality business is engaged in water quality analysis and treatment, providing instrumentation and disinfection systems to help analyze and manage the quality of ultra pure, potable and waste water in residential, commercial, industrial and natural resource applications. Its water quality operations design, manufacture and market a range of analytical instruments, related consumables, and associated services that detect and measure chemical, physical, and microbiological parameters in ultra pure, potable and waste water as well as groundwater and ocean bodies; ultraviolet disinfection systems, which disinfect billions of gallons of municipal, industrial and consumer water every day in more than 35 countries, and industrial water treatment solutions, including chemical treatment solutions intended to address corrosion, scaling and biological growth problems in boiler, cooling water and industrial waste water applications, as well as associated analytical services. Typical users of its analytical in! struments! , ultraviolet disinfection systems, industrial water treatment solutions and related consumables and services include professionals in municipal drinking water and waste water treatment plants and industrial process water and waste water treatment facilities, third-party testing laboratories and environmental field operations. Its water quality business provides products under a variety of well-known brands, including HACH, HACH/LANGE, TROJAN TECHNOLOGIES and CHEMTREAT. Manufacturing facilities are located in North America, Europe, and Asia.
The Company has served the retail/commercial petroleum market through its Veeder-Root business. Gilbarco Veeder-Root is a provider of products and services for the retail/commercial petroleum market, including environmental monitoring and leak detection systems; vapor recovery equipment; fuel dispensers; point-of-sale and secure electronic payment technologies for retail petroleum stations; submersible turbine pumps, and remote monitoring and outsourced fuel management services, including compliance services, fuel system maintenance, and inventory planning and supply chain support. Typical users of these products include independent and Company-owned retail petroleum stations, high-volume retailers, convenience stores, and commercial vehicle fleets. The Company markets its retail/commercial petroleum products under a variety of brands, including GILBARCO, VEEDER-ROOT, and GILBARCO AUTOTANK. Manufacturing facilities are located in North America, Europe, Asia and Latin America. Sales are generally made through independent distributors and its direct sales personnel.
LIFE SCIENCES & DIAGNOSTICS
The Company�� diagnostics businesses offer a range of analytical instruments, reagents, consumables, software and services that hospitals, physician�� offices, reference laboratories and other critical care settings use to diagnose disease and make treatment decisions. Its life sciences businesses offer a range of research and clinical ! tools tha! t are used by scientists to study cells and cell components to gain a better understanding of complex biological matters. Pharmaceutical and biotechnology companies, universities, medical schools and research institutions use these tools to study the causes of disease, identify new therapies and test new drugs and vaccines. The diagnostics business consists of its core lab, acute care and pathology diagnostics businesses.
The Company�� core lab diagnostics business is a manufacturer and marketer of biomedical testing instrument systems, tests and supplies that are used to evaluate and analyze samples made up of body fluids, cells and other substances. The information generated is used to diagnose disease, monitor and guide treatment and therapy, assist in managing chronic disease and assess patient status in the hospital, outpatient and physician office settings. Its chemistry systems use electrochemical detection and chemical reactions with patient samples to detect and quantify substances of diagnostic interest in blood and other body fluids. Commonly performed tests include glucose, cholesterol, triglycerides, electrolytes, proteins and enzymes.
The Company�� immunoassay systems also detect and quantify chemical substances of diagnostic interest in body fluids, particularly in circumstances where more specialized diagnosis is required. Commonly performed immunoassay tests assess thyroid function, screen and monitor for cancer and cardiac risk and provide important information in fertility and reproductive testing. Its cellular analysis business includes hematology, flow cytometry and coagulation products. The business��hematology systems use principles of physics, optics, electronics and chemistry to separate cells of diagnostic interest and then quantify and characterize them, allowing clinicians to study formed elements in blood (such as red and white blood cells and platelets). The business also distributes coagulation products, which rely on clotting, chromogenic! and immu! nologic technologies to provide the detailed information that clinicians require to diagnose bleeding and clotting disorders and to monitor anticoagulant therapy. It also offer systems and workflow solutions that allow laboratories to automate a number of steps from the pre-analytical through post-analytical stages including sample barcoding/information tracking, centrifugation, aliquotting, storage and conveyance. These systems along with the analyzers above are controlled through laboratory level software that enables laboratory managers to monitor samples, results and lab efficiency.
The Company�� acute care diagnostics business is a provider of instruments and related consumables and services that are used in both laboratory and point-of-care environments to rapidly measure critical parameters, including blood gases, electrolytes, metabolites and cardiac markers. Typical users of these products include hospital central laboratories, intensive care units, hospital operating rooms and hospital emergency rooms. Its pathology diagnostics business is engaged in the anatomical pathology market, offering a suite of instrumentation and related consumables used across the entire workflow of a pathology laboratory. Its pathology diagnostics products include tissue embedding, processing and slicing (microtomes) instruments and related reagents and consumables; chemical and immuno-staining instruments, reagents, antibodies and consumables; slide coverslipping and slide/cassette marking instruments, and imaging instrumentation including slide scanners, microscopes, cameras and associated software. Typical users of these products include pathologists, lab managers and researchers. Its diagnostics business generally markets its products under the BECKMAN COULTER, LEICA BIOSYSTEMS, RADIOMETER and SURGIPATH brands. Manufacturing facilities are located in North America, Europe, Asia and Australia. The businesses sell to customers primarily through direct sales personnel and to a lesser extent through ! independe! nt distributors.
The Company�� microscopy business is a provider of professional microscopes designed to manipulate, preserve and capture images of, and enhance the user�� visualization of, microscopic structures. Its microscopy products include laser scanning (confocal) microscopes; compound microscopes and related equipment; surgical and other stereo microscopes; specimen preparation products for electron microscopy; and digital image capture and manipulation equipment. The Company also offers workflow instruments and consumables that help researchers analyze genomic, protein and cellular information. Key product areas include sample preparation equipment, such as centrifugation and capillary electrophoresis instrumentation and consumables; liquid handling automation instruments and associated consumables; flow cytometry instrumentation and associated antibodies and reagents; and particle characterization instrumentation. The business also offers genome profiling services. Researchers use the business��products to study biological function in the pursuit of basic research, therapeutic and diagnostic development. Typical users of these products include pharmaceutical and biotechnology companies, universities, medical schools and research institutions and in some cases industrial manufacturers.
The Company�� mass spectrometry business is a provider of high-end mass spectrometers. Mass spectrometry is a technique for identifying, analyzing and quantifying elements, chemical compounds and biological molecules, individually or in complex mixtures. Its products utilize various combinations of quadrupole, time-of-flight and ion trap technologies, and are typically used in conjunction with a third party liquid chromatography instrument. Its mass spectrometer systems are used in numerous applications, such as drug discovery and clinical development of therapeutics as well as in basic research, clinical testing, food and beverage quality testing and environmental testing. To s! upport it! s installations around the world, it provides implementation, validation, training, maintenance and support from its global services network. Typical users of its mass spectrometry products include molecular biologists, bioanalytical chemists, toxicologists, and forensic scientists, as well as quality assurance and quality control technicians. It also provides high-performance bioanalytical measurement systems, including microplate readers, automated cellular screening products and associated reagents, and imaging software. Typical users of these products include biologists and chemists engaged in research and drug discovery, who use these products to determine electrical or chemical activity in cell samples. Its life sciences business generally markets its products under the LEICA MICROSYSTEMS, BECKMAN COULTER, AB SCIEX and MOLECULAR DEVICES brands. Manufacturing facilities are located in Europe, Australia, Asia and North America.
DENTAL
The Company�� Dental segment is a provider of a range of consumables, equipment and services for the dental market, which encompasses the diagnosis, treatment and prevention of disease and ailments of the teeth, gums and supporting bone. Its dental businesses develop, manufacture and market dental consumables and dental equipment orthodontic bracket systems and lab products; impression, bonding and restorative materials; endodontic systems and related consumables; infection prevention products, and diamond and carbide rotary instruments. Typical customers and users of these products include general dentists, dental specialists, dental hygienists, dental laboratories and other oral health professionals, as well as educational, medical and governmental entities. Its dental products are marketed primarily under the KAVO, GENDEX, iCAT, INSTRUMENTARIUM DENTAL, SOREDEX, PELTON & CRANE, DEXIS, ORMCO, KERR, PENTRON, SYBRON ENDO and TOTAL CARE brands.
INDUSTRIAL TECHNOLOGIES
The Company�� Industrial Technologies segment ! designs a! nd manufactures components and systems that are typically incorporated by original equipment manufacturers (OEMs) and systems integrators for sale into a diverse set of applications and end-markets. The businesses in this segment also provide service and support, including helping customers with integration and installation and providing services to ensure performance and up-time. Danaher�� product identification business is a global provider of equipment and consumables for variable printing, marking and coding on a variety of consumer and industrial products. Its businesses design, manufacture, and market a variety of equipment used to print bar codes, date codes, lot codes, and other information on primary and secondary packaging. Its equipment can apply alphanumeric codes, logos and graphics to a range of surfaces at a variety of line speeds, angles and locations on a product or package.
EskoArtwork, the business is a service solutions provider for the digital packaging design and production market. Typical users of the product identification business��products include food and beverage manufacturers, pharmaceutical manufacturers, retailers and commercial printing and mailing operations. Its product identification products are primarily marketed under the VIDEOJET, LINX, FOBA and ESKOARTWORK brands. Manufacturing facilities are located in North America, Europe, Latin America, and Asia. The Company is a provider of electromechanical motion control solutions for the industrial automation and packaging markets. Its businesses provide a range of products including standard and custom motors; drives; controls, and mechanical components, such as ball screws, linear bearings, clutches/brakes, and linear actuators.
The products are sold in various precision motion markets, such as the markets for packaging equipment, medical equipment, robotics, circuit board assembly equipment, elevators and electric vehicles (such as lift trucks). Its motion products are marketed under a vari! ety of br! ands, including KOLLMORGEN, THOMSON, DOVER and PORTESCAP. Manufacturing facilities are located in North America, Europe, Latin America, and Asia. Its sensors and controls products include instruments that monitor, sense and control discrete manufacturing variables such as temperature, position, quantity, level, flow and time. Users of these products span a wide variety of manufacturing markets. Certain businesses included in this group also make and sell instruments, controls and monitoring systems used by the electric utility industry to monitor their transmission and distribution systems, as well as automatic identification solutions. The products are marketed under a variety of brands, including DYNAPAR, HENGSTLER, IRIS POWER, WEST, GEMS SENSORS, SETRA and QUALITROL. Sales are generally made through our direct sales personnel and independent distributors.
The Company�� defense business designs, manufactures, and markets energetic material systems. Typical users of these products include defense systems integrators and prime contractors. defense products are typically marketed under the PACIFIC SCIENTIFIC ENERGETIC MATERIALS COMPANY brand. The KEO business designs, develops, manufactures and integrates highly engineered, stabilized electro-optical/ISR systems that integrate into submarines, surface ships and ground vehicles. Jacobs Vehicle Systems (JVS) is a supplier of supplemental braking systems for commercial vehicles, selling JAKE BRAKE brand engine retarders for class 6 through 8 vehicles and bleeder and exhaust brakes for class 2 through 7 vehicles. Customers are primarily manufacturers of class 2 through class 8 vehicles, and sales are typically made through its direct sales personnel. Manufacturing facilities of its sensors and controls, defense and JVS businesses are located in North America, Latin America, Europe and Asia.
Advisors' Opinion:- [By Monica Gerson]
Danaher (NYSE: DHR) is projected to report its Q3 earnings at $0.83 per share on revenue of $4.62 billion.
Intuitive Surgical (NASDAQ: ISRG) is expected to post its Q3 earnings at $3.40 per share on revenue of $525.99 million.
10 Best Machinery Stocks For 2014: Flowserve Corp (FLS)
Flowserve Corporation, incorporated on May 1, 1912, is a manufacturer and aftermarket service provider of flow control systems. The Company develops and manufacture precision-engineered flows control equipment integral to the movement, control and protection of the flow of materials in its customers' critical processes. The Company operates in three segments: Engineered Product Division (EPD), which includes long leads time, custom and other engineered pumps and pump systems, mechanical seals, auxiliary systems and replacement parts and related services, Industrial Product Division (IPD), which includes pre-configured engineered pumps and pump systems and related products and services, and Flow Control Division (FCD), which includes engineered and industrial valves, control valves, actuators and controls and related services. Effective December 10, 2013, Flowserve Corp acquired Innovative Mag-Drive LLC.
Through the Company's manufacturing platform and global network of Quick Response Centers (QRCs), the Company offers an array of aftermarket equipment services, such as installation, advanced diagnostics, repair and retrofitting. The Company's product portfolio of pumps, valves, seals, automation and aftermarket services supports global infrastructure industries, including oil and gas, chemical, power generation and water management, as well as certain general industrial markets where the Company's products and services add value. The Company sells its products and services to more than 10,000 companies, including some of the engineering, procurement and construction firms (EPC), original equipment manufacturers, distributors and end users.
Engineered Product Division
The Company designs, manufactures, distributes and services engineered pumps and pumps systems, mechanical seals, auxiliary systems, replacement parts and related equipment. The business primarily consists of long lead time, engineered, configured products, which require extensive test requirements a! nd project management skills. EPD products and services are primarily used by companies that operate in the oil and gas, power generation, chemical, water management and general industries. The Company markets its pump and mechanical seals products through its global sales force and its regional QRCs and service and repair centers or through independent distributors and sales representatives. A portion of the Company's mechanical seal products are sold directly to original equipment manufacturers for incorporation into rotating equipment requiring mechanical seals. The Company's pump products are manufactured in a range of metal alloys and with a variety of configurations to meet the critical operating demands of the Company's customers.
The Company also manufactures a gas-lubricated mechanical seal that is used in high-speed compressors for gases pipelines and in the oil and gas production and process markets. The Company's products are manufactured at 29 plants worldwide, nine of which are located in Europe, 11 in North America, four in Asia Pacific and five in Latin America. The Company also conducts business through strategic foreign joint ventures. The Company has six unconsolidated joint ventures that are located in China, India, Japan, Saudi Arabia, South Korea and the United Arab Emirates, where a portion of its products are manufactured, assembled or serviced in these territories. The Company manufactures more than 40 different active types of pumps and approximately 185 different models of mechanical seals and sealing systems.
The Company's EPD products include between bearings pumps, which include single case- axially split, single case- radially split, double case; overhung pumps, which includes api process; positive displacement pumps, which includes multiphase, reciprocating and screw; mechanical seals and seal support systems, which includes gas barrier seals and dry-running seals, and specialty products, which includes nuclear pumps, nuclear seals, cryogenic p! umps, cry! ogenic liquid expander, hydraulic decoking systems, and API slurry pumps. The Company�� EPD Brand Names include BW Seals, Byron Jackson, Calder Energy Recovery Devices, Cameron, Durametallic, Five Star Seal, Jeumont-Schneider, and Interseal. EPD Services includes provision of engineered aftermarket services through its global network of 128 QRCs, some of which are co-located in manufacturing facilities, in 41 countries. Its EPD service personnel provide a comprehensive set of equipment services for flow management control systems, including installation, commissioning, repair, advanced diagnostics, re-rate and retrofit programs, machining and comprehensive asset management solutions. The Company provides asset management services and condition monitoring for rotating equipment through special contracts with many of its customers that reduce maintenance costs.
Industrial Product Division
The Company designs , manufactures, distributes and services pre-configured engineered pumps and pumps systems, including submersible motors, for industrial markets. IPD's standardized, general purpose pump products are primarily utilized by the oil and gas, chemical, water management, power generation and general industries. The Company's products are manufactured in 12 manufacturing facilities, three of which are located in the United States and six in Europe. IPD operates 20 QRCs worldwide, including 11 sites in Europe, three in the United States , five in Asia Pacific and one in Latin America. The Company manufactures approximately 40 different active types of pumps available in a wide range of metal alloys and non-metallics with a variety of configurations. The products includes Overhung, which includes Chemical Process ANSI and ISO, Industrial Process , and Slurry and Solids Handling ; Specialty Products, which includes Molten Salt VTP Pump, Submersible Pump, Thruster, Geothermal Deepwell, and Barge Pump; Between Bearings, which includes Single Case- Axially Split and Single Case- Radia! lly Split! ; Vertical, which includes Wet Pit, Deep Well Submersible Motor, Slurry and Solids Handling, and Sump; Positive Displacement, which includes Gear. The Company�� brands include Aldrich, Durco, IDP, Pacific, Pleuger, Scienco, Sier Bath, Western Land Roller, TKL, Worthington, and Worthington-Simpson. The Company markets its pump products through its worldwide sales force and its regional service and repair centers or through independent distributors and sales representatives. The Company provide an array of aftermarket services including product installation and commissioning services, spare parts, repairs, re-rate and upgrade solutions, advanced diagnostics and maintenance solutions through its global network of QRCs.
Flow Control Division
The Company�� FCD designs, manufactures, distributes and services a portfolio of industrial valve and automation solutions, including isolation and control valves, actuation, controls and related equipment. In addition, FCD offers energy management products, such as steam traps, boiler controls and condensate and energy recovery systems. FCD products are used to control, direct and manage the flow of liquids and gases and are an integral part of any flow control system. The Company's valve products are often customized and engineered to perform specific functions within each customer's unique flow control environment. The Company's flow control products are primarily used by companies operating in the chemical (including pharmaceutical), power generation (nuclear, fossil and renewable), oil and gas, water management and general industries (including aerospace, pulp and paper and mining). FCD has 58 sites worldwide, including 25 principal manufacturing facilities ( five of which are located in the United States and 13 of which are located in Europe) and 33 QRCs, including three consolidated joint ventures. A small portion of the Company's valves are also produced through an unconsolidated joint venture in India.
The Company's pr! oducts ar! e used in a variety of applications, from general service to the severe and demanding services, including those involving high levels of corrosion, extreme temperatures and/or pressures, zero fugitive emissions and emergency shutdown. The Company's smart valve and diagnostic technologies integrate sensors, microprocessor controls and software into high performance integrated control valves, digital positioners and switchboxes for automated on/off valve assemblies and electric actuators. These technologies permit real-time system analysis, system warnings and remote indication of asset health. These technologies have been developed in response to the growing demand for reduced maintenance, improved process control efficiency and digital communications at the plant level. The Company's valve automation products encompass a range of pneumatic, electric, hydraulic and stored energy actuation designs to take advantage of whatever power source the customer has available.
The Company�� products includes valve automation systems, control valves, ball valves, gate valves, globe valves, check valves, lined plug valves, lubricated plug valves, diagnostic software, digital positioners, pneumatic positioners, intelligent positioners, pneumatic actuators, hydraulic actuators, diaphragm actuators, direct gas and gas-over-oil actuators. steam traps, boiler controls, digital communications, and valve and automation repair services. The Company�� brands include Accord, Anchor/Darling, Argus, Atomac, Durco, Edward, Flowserve, Gestra, Kammer, Limitorque, McCANNA/MARPAC, NAF, NAVAL, Noble Alloy, Norbro, Nordstrom, PMV, Serck Audco, Schmidt Armaturen, Valbart, Valtek, Vogt, and Worcester Controls. The Company provides equipment maintenance services for flow control systems, including advanced diagnostics, repair, installation, commissioning, retrofit programs and field machining capabilities.
The Company competes with Sulzer Pumps, Ebara Corp., SPX Corp., Eagle Burgmann, A. W. Chesterton Co. an! d AES Cor! p, John Crane Inc., and Weir Group Plc, ITT Industries, KSB Inc., Sulzer Pumps, Pentair Ltd., Cameron International Corp., Emerson Electric Co., General Electric Co. and Crane Co.
Advisors' Opinion:- [By Jim Jubak]
So, why did shares of Flowserve (FLS) soar 5.7%, yesterday?
Sure, the maker of all things that move water and other fluids beat Wall Street earnings projections for the fourth quarter by 6 cents a share (after excluding one-time charges) and revenue climbed 4.6% year over year, matching analyst estimates.
10 Best Machinery Stocks For 2014: Rexnord Corp (RXN)
Rexnord Corporation (Rexnord), incorporated on July 13, 2006, is a multi-platform industrial company. The Company comprises of two platforms, Process & Motion Control and Water Management. Rexnord�� Process & Motion Control product portfolio includes gears, couplings, industrial bearings, aerospace bearings and seals, FlatTop chain, engineered chain and conveying equipment, and are marketed and sold globally under brands, including Rexnord, Rex, Falk and Link-Belt. Its Water Management platform operates in the commercial construction market for water management products and the municipal water and wastewater treatment markets. Its Water Management product portfolio includes drainage products, flush valves and faucet products, backflow prevention pressure release valves, PEX piping and engineered valves and gates for the water and wastewater treatment markets. These products are marketed and sold through brand names, including Zurn, Wilkins, VAG, GA, Rodney-Hunt and Fontaine. In August 2013, Rexnord Corp announced that it has acquired the assets of Micro Precision Gear Technology Limited. In December 2013, Rexnord acquired Precision Gear Holdings, LLC (PGH). PGH has two operating subsidiaries, Merit Gear LLC and Precision Gear LLC.
Process & Motion Control
The Company�� Process & Motion Control platform designs, manufactures, markets and services mechanical components used within complex systems. The Company sells its Process & Motion Control products into a diverse group of end markets, including mining, general industrial applications, cement and aggregates, agriculture, forest and wood products, petrochemical, energy, food and beverage, aerospace and wind energy. The Company is a manufacturer of gear drives and gear sets for the heavy duty industrial market. Its gear drives, service and gear sets are used in a number of heavy duty industries. These primary industries include the natural resource extraction, steel, pulp and paper, chemical, forest and wood industries. ! Rexnord manufactures a range of heavy duty, medium and light duty gear drives used for bulk material handling, mixing, pumping and general gearing applications. It also operates a gear service and repair business through its Product Service group (Prager and Renew). Its Couplings are primarily used in high-speed, high-torque applications and are the interface between two shafts that permit power to be transmitted from one shaft to the other. Rexnord�� couplings are sold to a range of end markets, including the petrochemical and refining, wood processing, chemical, power generation and natural resources industries. Couplings comprise of the grid, flexible disc, elastomeric and gear product lines and are sold under the Steelflex, Thomas, Omega, Rex, Viva, Wrapflex, Lifelign, True Torque, Addax and Autogard brand names.
The Company primarily produces mounted bearings, which are offered in a range of specialized housings to suit specific industrial applications. Its FlatTop chain provides a continuous conveying surface that is critical to high-speed operations, such as those used to transport cans and bottles in beverage-filling operations, and is primarily sold to the food and beverage, consumer products, warehousing and distribution, and parts processing industries. The Company supplies its aerospace bearings and seals to the commercial aircraft, military aircraft and regional jet end markets for use in door systems, engine accessories, engine controls, engine mounts, flight control systems, gearboxes, landing gear and rotor pitch controls. Rexnord�� aerospace bearings and seals products consist of rolling element airframe bearings sold under the Shafer brand name, slotted-entry and split-ball sliding bearings sold under the PSI brand name and aerospace seals that are sold under the Cartriseal brand name, which are primarily sold for use in both aerospace and industrial applications.
The Company�� special components products consist of three primary product lines: electri! c motor b! rakes, miniature Process & Motion Control components and security devices for utility companies. These products are manufactured by its businesses, such as Stearns, W.M. Berg and Highfield. Stearns��products are used in a range of applications, including steel mills, oil field equipment, pulp processing equipment, large textile machines, rubber mills, metal forming machinery and dock and pier handling equipment. W.M. Berg sells its products to a range of markets, including aerospace, semiconductor, medical equipment, robotics, instrumentation, office equipment and satellite communications. Highfield�� products are sold to a range of markets, including electric, gas, water, telecommunications, utilities and plumbing and heating.
The Company�� conveying equipment and industrial chain products are used in various applications in a number of industries, including food and food processing, beverage and container, mining, construction and agricultural equipment, hydrocarbon processing and cement and aggregates processing. Its primary products include conveying equipment, engineered steel chain, and roller chain. Its conveying equipment product group provides design, assembly, installation and after-the-sale services primarily to the mining, cement and aggregates industries. Its products include engineered elevators, conveyors and components for medium to heavy duty material handling applications. The Company�� engineered steel chain products are sold under the Link-Belt and Rexnord brand names. These products are used in a number of applications, including cement elevators, construction and mining equipment and conveyors, and they are supplied to the cement and aggregates, energy, food and beverage, and forest and wood products industries.
Water Management
The Company�� Water Management platform designs, procures, manufactures and markets products that provide and enhance water quality, safety, flow control and conservation. The Water Management product port! folio inc! ludes professional grade specification drainage products, flush valves and faucet products, engineered valves and gates for the water and wastewater treatment market and PEX piping and are marketed and sold through brand names, including Zurn, Wilkins, VAG, GA, Rodney Hunt and Fontaine. Rexnord�� Water Management platform has a network of approximately 1,100 independent sales representatives across approximately 210 sales agencies in North America, who work with local engineers, contractors, builders and architects to specify its products for use in construction projects. Its water control and safety products are sold under the Wilkins brand name and encompass a variety of valves, including backflow preventers, fire system valves, pressure reducing valves and thermostatic mixing valves. These products are sold into the commercial and industrial construction applications, as well as the fire protection, waterworks and irrigation end markets.
Zurn�� commercial brass products include manual and sensor operated flush valves marketed under the Aquaflush, AquaSense, AquaVantage and HydroVantage brand names and heavy duty commercial faucets marketed under the AquaSpec brand name. Water conserving fixtures are marketed under the EcoVantage and Zurn One brand names. These products are used in office buildings, schools, hospitals, airports, sports facilities, convention centers, shopping malls, restaurants and industrial production buildings. The Zurn One Systems integrate commercial brass and fixtures into plumbing systems. PEX is its product line manufactured out of cross-linked polyethylene into tubing and is suited for high temperature and pressure fluid distribution piping. Its PEX products include lines of pipe, fittings, valves and installation tools for both potable water and radiant heating systems. Its water and wastewater products are sold under the VAG, GA, Rodney Hunt and Fontaine brand names and are used to control the flow of water and wastewater throughout the water cycle from ra! w water t! hrough collection, distribution and wastewater treatment. Products include automatic control valves, check valves, air valves, butterfly valves, water control gates, hydrants, actuation systems, and other specialized products for municipal, industrial, and hydropower applications. Its product lines are primarily sold into the water supply and treatment markets worldwide.
Advisors' Opinion:- [By gurujx]
Rexnord Corp (RXN): SVP & CFO Mark W Peterson Sold 35,983 Shares
SVP & CFO of Rexnord Corp (RXN) Mark W Peterson sold 35,983 shares on 09/19/2013 at an average price of $20.03.
10 Best Machinery Stocks For 2014: Emak SpA (EM)
Emak SpA is an Italy-based company primarily engaged in the manufacture of outdoor power equipment for gardening, forestry, agriculture and industry. The Company�� portfolio includes chainsaws, brush cutters, lawnmowers, garden tractors, water pumps, high pressure washers, transporters, rotary cultivators, motor hoes and power cutters, among others. It also manufactures spare parts, accessories and protective clothing. The Company sells its products under various brand names, such as Oleo-Mac, Efco, Bertolini, Nibbi and Staub. Emak SpA directly manages distribution in the Italian market and it sells products, through its commercial subsidiaries, in France, Germany, the United Kingdom, Spain, the countries of Benelux, Poland, Ukraine, among others.The Company is controlled by Yama SpA, which is an industrial holding company. Advisors' Opinion:- [By Holly LaFon]
As true value investors, Brandes oft en moves against the crowd amid markets' constantly changing performance cycles. Take the recent equity market weakness in a number of emerging market (EM) countries for example. Over the last year, while macroeconomic and geopolitical concerns cast a cloud of uncertainty over the asset class in general, we started to see some interesting investment opportunities at the company level as a result of such market weakness.
- [By Federico Zaldua]
Brookfield Infrastructure has a number of potentially profitable areas for investment around the world but, above all, in infrastructure hungry Emerging Markets (EM) such as Brazil. According to Credit Suisse analysts, in Brazil, funds can be invested at Funds From Operations (FFO) yields above 12%. Therefore, the company's ability to grow its distribution yield, whether through acquisitions or organically, is critical to evaluate the company's value. Moreover, the currently conservative dividend payout ratio should allow Brookfield Infrastructure to self-finance on going opportunities.
- [By Canadian Value]
For 20+ years there has been a coherent growth story around Emerging Markets (EM), where the label "Emerging Market" had real meaning within a common knowledge perspective. Today ��not so much. Today the story is that it was easy money from the Fed that drove global growth, EM or otherwise. Today the story is that Emerging Markets are just the levered beneficiaries or victims of Fed monetary policy, no different than anyone else��
10 Best Machinery Stocks For 2014: Xylem Inc (XYL)
Xylem Inc. (Xylem), formerly ITT WCO, Inc., incorporated on May 4, 2011, is a provider of equipment and service for water and wastewater applications with a portfolio of products and services addressing the full cycle of water, from collection, distribution and use to the return of water to the environment. It operates in two segments: Water Infrastructure and Applied Water. The Water Infrastructure segment focuses on the transportation, treatment and testing of water, offering a range of products, including water and wastewater pumps, treatment and testing equipment, and controls and systems. Key brands in this segment include Flygt, Wedeco, Godwin Pumps, WTW, Sanitaire, AADI and Leopold. The Applied Water segment encompasses the uses of water and focuses on the residential, commercial, industrial and agricultural markets. The segment�� products include pumps, valves, heat exchangers, controls and dispensing equipment. Key brands in this segment include Goulds Water Technology (Goulds), Bell & Gossett, AC Fire, Standard, Flojet, Lowara, Jabsco and Flowtronex. The Company sells its products in more than 150 countries through a distribution network consisting of its direct sales force and independent channel partners. On October 31, 2011, ITT Corporation completed Spin-off of Xylem, formerly ITT�� water equipment and services businesses. The Spin-off was completed pursuant to the Distribution Agreement, dated as of October 25, 2011, among ITT, Exelis Inc. (Exelis) and Xylem. In July 2012, it acquired MJK Automation A/S. In March 2013, it acquired MultiTrode Pty Ltd.
Water Infrastructure
Water Infrastructure involves the process that collects water from a source and distributes it to users, and then returns the wastewater to the environment. Water Infrastructure serves three applications: transport, treatment and test of water and wastewater for two types of customers: public utilities and industrial facilities. The Transport application includes all of the equipment and s! ervices involved in the movement of water from sources, such as oceans, lakes, rivers and ground water, to treatment facilities, and then to users. It also includes the movement of wastewater from the point of use to a treatment facility and then back into the environment. The Company serves the equipment markets, such as water and wastewater submersible pumps, monitoring controls, and application solutions. With operations on six continents, it also has dewatering rental fleet, serviced with the Company�� Flygt and Godwin brands. In its Water Infrastructure Segment, Transport accounted for approximately 73% of its consolidated revenue during the year ended December 31, 2011. Flygt is the manufacturer of submersible pumps, mixers, and aeration equipment for use in environments, such as water and wastewater treatment, raw water supply, abrasive or contaminated industrial processes, mining and crop irrigation. Flygt products have applications in various markets, including wastewater lift stations, water and wastewater treatment facilities, pressurized sewage systems, oil and gas, steel, mining and leisure markets. Customers include public utility wastewater and clean water treatment facilities, oil and gas platforms, and steel manufacturing companies.
Godwin Pumps is engaged in pump manufacturing. It manufactures, sells, rents and services products that are customized to the specific needs of its clients. Godwin Pumps��products include the fully automatic self-priming Dri-Prime pump, a range of Sub-Prime electric and Heidra hydraulic submersible pumps, Wet-Prime gasoline-powered contractor pumps and a line of generators and portable light towers. Godwin products are primarily used in construction, disaster recovery, flooding, heavy industry, marine use, mining, oil, gas and chemical extraction, refineries, temporary fire protection and water and wastewater transport. Customers include industrial plants, construction contractors, public utility wastewaters and clean water treatment and tr! ansportat! ion facilities, oil, gas and chemical drilling outfits, and refineries. Godwin�� fleet of equipment is rented through 33 United States branches and a global network of distributors. The Treatment application includes equipment and services that treat both water for consumption and wastewater to be returned to the environment. Leopold is the Company�� filtration brand. Disinfection systems, both ultraviolet (UV) and ozone oxidation, treat both public utility drinking water and wastewater, as well as industrial process water, and are provided through its WEDECO brand. Biological treatment systems are key to the treatment of solids in wastewater plants, which is provided through its Sanitaire brand. In its Water Infrastructure Segment, Treatment accounted for approximately 18% of its consolidated net sales in 2011.
The Company�� Sanitaire brand provides biological wastewater treatment solutions for public utility and industrial applications. Sanitaire�� offering includes diffused aeration, sequencing batch reactors, drum filters and state-of-the-art controls. Sanitaire is a brand in diffused aeration, which is a process that introduces air into a liquid, providing an aerobic environment for degradation of organic matter. Principal Sanitaire customers are public utility and industrial wastewater treatment facilities. WEDECO develops chemical-free and environmentally friendly water treatment technologies, including ultraviolet light and ozone systems. There are over 250,000 installed WEDECO systems for UV disinfection and ozone oxidation globally in private, public utility and industrial locations. Customers include public utility wastewater and clean water treatment facilities, power plants, pulp and paper mills, food products manufacturers and aquaculture facilities. Leopold is a gravity media filtration and clarification solutions for the water and wastewater industry. Nova Analytics, its served market is focused on water and the environment for quality levels throughout the water in! frastruct! ure loop.. Analytical systems are applied in three primary ways: in the field, in a facility laboratory, or real time, online monitoring in a treatment facility process. In its Water Infrastructure Segment, Test accounted for approximately 9% of its consolidated net sales in 2011.
In wastewater treatment facilities, WTW-branded systems monitor parameters, such as dissolved oxygen, pH, and turbidity throughout the water process. WTW�� product offering includes meters, sensors, data-loggers, photometers and software. Aanderaa Data Instruments AS (AADI) offers sensors, instruments and systems for measuring and monitoring in environments, such as rivers, oceans and the polar regions through networked systems using wireless technology that monitors temperature, salinity, oxygen, turbidity, current and waves for ecosystem health. The main market areas are marine transportation, environmental and ocean research, oil and gas, aquaculture, road and traffic, and construction. Oceanography International Corporation (OI Analytical) provides products used for chemical analysis. The Company develops, manufactures, sells, and services analytical instruments that detect, measure, analyze, and monitor chemicals in liquids, solids, and gases. Yellow Springs Instrument Company (YSI) develops and manufactures sensors, instruments, software and data collection platforms for environmental and coastal water quality monitoring and testing. YSI also offers life sciences products, including biochemical analyzers for bioprocess monitoring, food and beverage processing, and sports physiology. The main market areas are marine transportation, environmental and ocean research, oil and gas, aquaculture, road and traffic, and construction.
Applied Water
Applied Water encompasses all the uses of water. Its served market consists of the main uses of global water: Building Services, Industrial Water and Irrigation. The Building Services is defined by four main uses of water in building services ! applicatio! ns, such as in residential homes and commercial buildings, including offices, hotels, restaurants and malls. The first is the supply of potable water for consumption, such as for drinking and hygiene. The Goulds brand offers pumps and boosting systems utilized within buildings, sourcing water from distribution networks or from wells. The second application is wastewater removal with sump and sewage pumps. The third application is in heating, ventilation and air conditioning (HVAC), where Bell & Gossett specializes in pumps and valves that are used in water-based heating and cooling systems. The fourth water-related building service area is fire protection, where its AC Fire brand supplies full pump systems for emergency fire suppression. In Europe, Lowara is a brand in the commercial and residential water market with applications in the four main uses of water. In its Applied Water Segment, Building Services accounted for approximately 51% of its consolidated net sales in 2011.
The Company�� Goulds brand supplies vertical multistage pumps to boost pressure for purposes , such as circulating water through a manufacturing facility to cool machine tools. Its Lowara brand focuses on water treatment, industrial washing equipment and machine tool cooling. The Standard brand delivers heat exchangers for combined heat and power (CHP) applications within power generation plants. It also provides applications, such as flexible impeller pumps for wine processing facilities served by its Jabsco brand, and water-based detergent dispensing and water circulation within car washes served by Flojet and Goulds air-operated diaphragm and end suction pumps. In its Applied Water Segment, Industrial Water accounted for approximately 42% of its consolidated net sales in 2011. The irrigation business consists of irrigation-related equipment and services associated with bringing water from a source to the plant or livestock need, including hoses, sprinklers, center pivot and drip irrigation. The Company focuses ! on the pu! mps and boosting systems that supply this ancillary equipment with water. Its Goulds brand brings mixed flow pumps, and its Flowtronex group specializes in equipment solutions, such as the Hydrovar boosting system, which incorporates monitoring and controls. Its Lowara brand also produces pumps for agriculture applications and irrigation of gardens and parks. In its Applied Water Segment, Irrigation accounted for approximately 7% of the Company�� consolidated net sales in 2011.
Advisors' Opinion:- [By Holly LaFon]
Xylem Inc. (0.7%) (XYL)(XYL - $36.42 - NYSE) is a global leader in the design, manufacturing, and application of highly engineered technologies for the transportation, treatment, and testing of water. The company is expected to benefit from favorable long term fundamentals in the water industry, driven by scarcity, population growth, aging of the infrastructure, and the need to improve water quality. Further, with a large installed base of pumps and systems, the company is well positioned to increase aftermarket revenue, which currently represents roughly 40% of total revenues. Xylem's attractive business mix also generates strong cash flow, which is expected to support acquisitions, debt service, and dividend growth. Concerns regarding weakness in Europe and municipal spending levels in the U.S. remain, although we believe the long term fundamentals outweigh these concerns. From Mario Gabelli (Trades, Portfolio)'s Gabelli Asset Fund's first quarter 2014 shareholder commentary.Also check out: Mario Gabelli Undervalued Stocks Mario Gabelli Top Growth Companies Mario Gabelli High Yield stocks, and Stocks that Mario Gabelli keeps buying Currently 0.00/512345
Rating: 0.0/5 (0 votes)
10 Best Machinery Stocks For 2014: Lincoln Electric Holdings Inc (LECO)
Lincoln Electric Holdings, Inc., incorporated in 1906, is a manufacturer of welding, cutting and brazing products. Welding products include arc welding power sources, wire feeding systems, robotic welding packages, fume extraction equipment, consumable electrodes and fluxes. The Company's product offering also includes computer numeric controlled (CNC) plasma and oxy-fuel cutting systems and regulators and torches used in oxy-fuel welding, cutting and brazing. The Company operates in five segments: North America Welding, Europe Welding, Asia Pacific Welding, South America Welding and The Harris Products Group. On July 29, 2011, the Company acquired Techalloy Company, Inc. and certain assets of its parent company, Central Wire Industries Ltd. On July 29, 2011, the Company acquired Applied Robotics, Inc. (doing business as Torchmate) (Torchmate). On January 31, 2011, the Company acquired SSCO Manufacturing, Inc. (doing business as Arc Products) (Arc Products). On March 11, 2011, the Company completed the acquisition of OOO Severstal-metiz: welding consumables (Severstal). In March 2012, the Company acquired Weartech International, Inc. In May 2012, the Company acquired Wayne Trail Technologies, Inc., a manufacturer of automated systems and tooling, serving a range of applications in the metal processing market. In November 2012, ITT Corp sold its shape cutting product lines, including the Burny and Kaliburn brands to the Company. In January 2013, the Company acquired Tennessee Rand, Inc.
The North America Welding segment includes welding operations in the United States, Canada and Mexico. The Europe Welding segment includes welding operations in Europe, Russia and Africa. The other two welding segments include welding operations in Asia Pacific and South America, respectively. The Harris Products Group includes the Company's global cutting, soldering and brazing businesses as well as the retail business in the United States. The arc welding power sources and wire feeding systems man! ufactured by the Company range in technology from basic units used for light manufacturing and maintenance to robotic applications for high volume production welding and fabrication. Three primary types of arc welding electrodes are produced: coated manual or stick electrodes; solid electrodes produced in coil, reel or drum forms for continuous feeding in mechanized welding, and cored electrodes produced in coil form for continuous feeding in mechanized welding.
Advisors' Opinion:- [By Seth Jayson]
Lincoln Electric Holdings (Nasdaq: LECO ) is expected to report Q2 earnings on July 29. Here's what Wall Street wants to see:
The 10-second takeaway
Comparing the upcoming quarter to the prior-year quarter, average analyst estimates predict Lincoln Electric Holdings's revenues will expand 1.8% and EPS will expand 9.9%. - [By Seth Jayson]
Lincoln Electric Holdings (Nasdaq: LECO ) is expected to report Q1 earnings on April 23. Here's what Wall Street wants to see:
The 10-second takeaway
Comparing the upcoming quarter to the prior-year quarter, average analyst estimates predict Lincoln Electric Holdings's revenues will grow 1.1% and EPS will grow 2.6%.
10 Best Machinery Stocks For 2014: Cleantech Transit Inc (CLNO)
Cleantech Transit, Inc., incorporated on June 28, 2006, is a development-stage company. The Company focuses to explore opportunities in the development and production of hybrid, electric, alternative fuel and diesel heavy duty transit buses, luxury motor coaches and tour buses. On July 11, 2011, the Company formed Cleantech Energy, Inc. as a wholly owned subsidiary. In February 2013, the Company announced that acquired from Crown Equity Holdings Inc., Crown Buy Rite.
On July 25, 2011, the Company formed Cleantech Exploration Corp. as a wholly owned subsidiary. On October 31, 2011, the Company acquired a 40% interest in Ortigalita Power Systems, LLC a waste power generating project in California.
Advisors' Opinion:- [By CRWE]
Cleantech Transit, Inc. (OTCMKTS:CLNO) (www.cleantechtransit.net ) through its Discovery Carbon subsidiary, develops emissions offset strategies for companies, municipalities, and countries. Today, CLNO has shed (-14.29%) down -0.030 at $.180 with 513,798 shares in play thus far (ref. google finance Delayed: 3:18PM EDT July 11, 2013), but don�� let this get you down. Earlier this morning (July 11), this company hit as low as $.162 and as high as $.219.
No comments:
Post a Comment